Steel roll mesh welded galvanized wire mesh making machine supplier

Automatic welded galvanized wire mesh making machine supplier

1.This machine can make both of panel mesh and roll mesh

2.Line wires are fed from wire coils automatically and through straightening rollers

3.Cross wire should be pre-cut and fed by cross wire Feeder automatically

4.Equipped with Cutting Machine to make panel mesh and Rolling Machine to make roll mesh

Model	DP-FP-2500BN
Wire diameter	3-6 mm
Line wire space	50-300mm
Cross wire space	Min.50mm
Mesh width/height	Max.2.5m
Mesh length	Max.100m
Welding electrodes	48 pcs
Welding speed	50-75 times/min
Welding transformers	150kva*6pcs
Line wire feeding	From wire coils
Cross wire feeding	Pre-cut
Overall Size	5.4*3.2*1.7m
Weight	5500kg

	Welding electrodes- chromium zirconium copper Upper-20mm diameter Lower-20*20*20mm, can be used 6 sides, The welding electrode distance can be adjusted.
Main motor (5.5kw)& planetary  reducer connect the main axis directly,  instead of by chain. It is not easily broken. High stability. Big transmission torque, suitable for high  welding speed.
	Cast water cooling welding transformers Suitable for high temperature. When 2.5-4mm one welding transformer  controls 8 welding electrodes. When 4-6mm, one welding transformer  controls 4 welding electrodes.
Panasonic brand servo motor (2kw) for  mesh pulling, accurate, big power. SMC air cylinders controls the hook  up&down. J&T brand pulling rack, less noise, high  accuracy

Q: What's the machine price?
A: We need to know the mesh hole size and mesh width you want.

Q: Can you make the machine according to my voltage?
A: Yes, usually the popular voltages are 3 phase, 380V/220V/415V/440V, 50Hz or 60Hz etc.

Q: Is there any cooling system on your machine?
A: We use water cooling welding transformers on the machine.

Q: How many containers are needed to load one machine?
A: One 40 feet container is just enough.

Q: Is the mesh size adjustable?
A: Yes. The mesh size can be adjusted randomly within range.

Q: Can I adjust the welding degree?
A: Yes, you can adjust the welding current and welding time. It is controlled by PLC.

Q: What's the production capacity of this machine?
A: If 150*150mm mesh size, 25m mesh length, about 3.5 minutes the machine can weld 1 mesh roll.

Q: What’s the power supply needed for this machine, does it need air power?
A: The power supply should be min.160kva. Air compressor 0.3m^3.