China Poultry Feeding Chicken Cage Welding Machinery
Product Description
China Poultry Feeding Chicken Cage Welding Machinery
This is our new developed Chicken cage welding machine DP-AW-1200H. The welding speed can be up to maximum 130 times/min. It has advantage of easier machine maintenance, less machine problem, easier to learn and operate, save power and consumption, less welding spark etc.
| Model | DP-AW-1200H | DP-AW-1500H | DP-AW-1600H |
| Wire diameter | 2-3.5mm/2-4mm | ||
| Longitude wire space | Mostly 50-200mm(If min.25*25mm,we can also design.) | ||
| Cross wire space | Min.25mm or smaller(PLC control) | ||
| Mesh width | Max.1200mm | Max.1500mm | Max.1600mm |
| Welding electrodes | 25pcs | 32pcs | 32pcs |
| Welding transformer | 125kva*3pcs | 125kva*4pcs | 125kva*4pcs |
| Longitude wire feeding | Form wire coils | ||
| Cross wire feeding | Pre-straightened&pre-cut(cross wire Feeder) | ||
| Welding speed | Max.130 times/min | ||
| Space needed | 12*5m | ||
| Weight | 3100kg | 3600kg | 3840kg |
 | Pneumatic welding, each welding electrode is controlled by one SMC air cylinder. Electrodes 20*20*20mm, can be used 6 sides. |
| Double cross wire feeders, can feed different length of cross wires. It is specially designed, the feeding speed is higher, can be 130pcs/min. |  |
 | The edge cutter is controlled by two big SMC brand air cylinders and specially designed, the cutting speed can match the welding speed. |
| Panasonic servo motor for pulling mesh, cross wire space can be adjusted by PLC. The pulling rack is J&T brand, more accurate, less noise. |  |
 | The mesh cutting is automatic. After cutting, the mesh can fall down automatically to the mesh stacking car. |
|  |
1.Cage bending machine is used to bend the top cage mesh and bottom cage mesh.
2.Edge Cutting Machine is used to cut the extra wires of the mesh side.
3.Door digging machine is used to cut the insider wires of the cage mesh to make a door.
4.C nail gun is used to connect the bottom cage mesh, top cage mesh and partition mesh.
5.Electric cutter is used to cut the mesh manually.
6.Spot welding machine is used to weld the partition mesh, single spot or multi spots.
7.Wire straightening and cutting machine is used to straight and cut the wires.
Product Categories : Chicken cage welding machine
Premium Related Products
