Tire wire drawing machine / water tank iron wire drawing machine / wire nail drawing machine
Product Description
Automatic copper steel wire drawing making machine factory price
Wire drawing machine is to reduce steel wire from big diameter to small diameter. We have different types of wire drawing machines to make different wire diameters:
-Horizontal wire drawing machine (10mm to 5mm);
-Straight wire drawing machine (6.5mm to 1.8mm);
-Pulley wire drawing machine (6.5mm to 2mm);
-Water tank drawing machine(2mm to 0.7mm).
The drawn wire is extensively used to produce especially steel wire mesh-like welded wire mesh, chain link fence, hexagonal wire mesh, nails, etc.
1. Horizontal wire drawing machine (10mm to 5mm)
1) This machine is to draw rod wire by round drawing mold.
2) It is made up of sheller, butt welder, head pointing machine, drawing powder, soap, drawing machine part, control cabinet, and wire coiling machine.
3) It is controlled by inverter, the frequency can be adjusted. It means speed can be adjusted.
Technical parameter:
| Model | DLW-10 | Drawing speed | Max. 120m/min one line |
| Inlet wire diameter | 5-12mm | Outlet wire diameter | 5-10mm |
| Motor | 75kw inverter, the frequency can be adjusted. | Speed control | Frequency inverter |
| Diameter of rolling wheel | 550mm | Gearbox | model 650, ratio: 40.17 |
| Dimension | 2.1*0.1*0.8m | Weight | 2.5T |
2. Straight wire drawing machine (8mm/6.5mm to 1.8mm)
1) INOVANCE Inverter adjustable motor and gearbox for adjusting speed, saving 30% electricity;
2) The drawing path is painted with the surface of Tungsten carbide, a long lifetime.
3) Water cooling system to decrease the working temperature, working smooth, service life extended.
4) Safety operation with Centralized control panel.
Technical parameter:
| Model | LZ-560 |
| Raw material | low-carbon steel wire (Q195, Q215, and Q 235.) |
| Number of blocks | 11 |
| Wire diameter | Inlet Max. 6.5mm and outlet Min. 1.8mm |
| Compression (%) | Min. 22.7 |
| Strength tensile (Mp) | Max. 708 |
| Reduction ration | Max. 55 |
| Motor | 22KW |
| Production | Max. 11tons/8hrs, max. 12m/s |
| Inverter brand | INVT inverter, saving 30% electricity |
| Dia. of pot | 560mm |
| Dimension | 5*1.5*1.3M |
| Unit Weight | 1800 KGS |
3. Pulley wire drawing machine (6.5mm to 2mm)
Technical parameter:
| Model | DLW1-5-560 |
| Raw material | low-carbon steel wire (Q195, Q215, and Q 235.) |
| Number of blocks | 8 |
| Wire diameter | Inlet Max.6.5mm and outlet Min. 2mm |
| Motor | 18.5KW, 4 level, 1440r/min |
| Production | Max.422m/min ( Max. 5 tons/8hours ) |
| Inverter brand | INOVANCE inverter, saving 30% electricity |
| Drawing path | 1-8 |
| Dia. of pot | 560mm |
| Dimension | 4*1.685*2.1M |
| Unit weight | 1500 KGS |
Auxiliary equipment:
4. Water tank drawing machine(2mm to 0.7mm)
The wet wire drawing machine consists of a pay-off stand, motor, and main drive box (including cooling and lubrication system). The main drive box is driven by gear and chain.
Technical parameter:
| Model | DLW350 |
| Diameter of the spool for finished wire | 350mm |
| Inlet wire | Max. 2.0mm |
| Output wire (mm) | Min. 0.7mm |
| Cumulative reduction | 86% |
| Mean pass reduction | 16% |
| Drawing speed | Max.280 m/min |
| Associated motor | 22kw |
| Raw material | low-carbon wire |
| Overall dimension(L×W×H) | 2400×1100×1100mm |
| Weight | 1800kg |
The electric furnace is used to anneal the wire. So, the wire is not easy to break and can be redrawn into a smaller diameter. Each furnace is equipped with three 4-8 annealing blocks for cycling use. This machine adopts the two-section intelligent separate temperature control, silicon controlled, the precision is very high.
Technical parameter:
| Model | Electric furnace |
| Raw material | low-carbon wire with spool 850*500 |
| Capacity | 12tons/24hours |
| Furnace boy texture | Q235iron sheet and 320mm alumina brick |
| Temperature control | Intelligent control |
| Annealing block | Aluminized block |
| Height of the furnace | 2500mm |
| Working temperature | Maximum 980° |
| The inner diameter of the furnace | 1050mm |
| Voltage | Customized as your request |
| Motor | 180KW |
| Power consumption | 700-800KW per 8hours |
| Dimension | 2.1*2.1*2.3m |
| Weight | 4550KGS |
Hebei Jiake Welding Equipment Co., Ltd. It’s the leading manufacturer of wire mesh machines in China and we always offer ADVANCED WIRE MESH TECHNOLOGY.
Q: Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q: How many years are your company engaged in the wire mesh machines?
A: More than 25 years. We have our own technology to develop the department and testing department.
Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 100 countries before. They are very experienced.
Q: What's the guaranteed time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q: Can you export and supply the customs clearance documents we need?
A: We have much experience with exporting. And we can supply the CE certificate, Form E, passport, SGS report, etc, your customs clearance will be no problem.
We are known as one of the most professional and reliable Metal Mesh Making Machine manufacturers and suppliers in China. If you are looking for an wire drawing machine, please feel free to buy the quality automatic machine with a competitive price from our factory. Excellent service is available in 24 hours.
Product Categories : Wire drawing machine
Premium Related Products
